KEGS

Finished Kegs 1/2 bbl and Firkins 1/2 bbl keg bottom of half-barrel keg

KEG SIZES AVAILABLE:  1/6 bbl (torpedos), 1/4 bbl (slim), 50 liter, 1/2 bbl, Firkins (10.8 US Gallons).  Also available (special order):  1/4 bbl (short), 50 liter (DIN), 30 liter (short), 20 liter (short).

SPEAR:  American Sankey (others available as special order)
MATERIAL:  All stainless (SUS 304)
EMBOSSING AVAILABLE:  50 pc. minimum, ordered in advance of keg production.
STRIPING AVAILABLE:  50 pc. minimum, ordered in advance of keg production.  RAL colors (www.ralcolor.com).
SHIPPING:  Shipping is FOB Portland, Oregon.  Please contact us for a shipping quote.  We will need your zip code to quote shipping.
INTERNATIONAL ORDERS:  Please request a quote for shipping charges through the Contact Us page.
 
We will be glad to provide customized kegs in small quantity runs.

Pricing and Specifications

Stout Tanks Keg Prices 4-2013


Small Quantity Keg Purchases






$340 for 4 kegs

1/6 Bbl Kegs –

Box of 4 Kegs






$255 for 3 kegs

 

1/6 Bbl Kegs –

Box of 3 Kegs






$170 for 2 kegs

 

1/6 Bbl Kegs –

Box of 2 Kegs





$85 for 1 keg

 

1/6 Bbl Keg –

Single Keg (shipped separately)





$129 for 1 keg

 

1/2 Bbl Keg –

Single Keg (shipped separately)

    





$109 for 1 firkin

 

Firkin (10.8 US Gallons) –

Single Firkin (shipped separately)

    

Please inquire by email for larger orders.
Keg Inspection and Testing Procedures

Pressure Test:
  1. Keep the keg under 6.3bar pressure for 1 minute, the body shall not twist.
  2. Keep the keg under 10 bar pressure for 1 minute, the body’s twist shall be ≤50ml.
  3. Destroy test: pressure ≥75ba; keg twist is allowed when struck by a hydraulic machine
Drop Test:
  1. 50°drop test:  Kegs shall be filled with cold water (not less than 99.5%), and then be dropped from 4 feet (1.2 meters) using slings at correct angle (50°) with a quick release mechanism for 3 times onto a 1 inch (25mm) steel plate on the ground.
  2. 90°drop testing;  Kegs shall be filled with cold water (not less than 99.5%), and then be dropped from 4 feet (1.2 meters) using slings at correct angle (90°) with a quick release mechanism for 3 times onto a 1 inch (25mm) steel plate on the ground.
Burst Test: Add a burst disc under the bottom, and increase the pressure up to 40 ± 10 bar. The burst disc is allowed to break, but no more breakage anywhere else.

Color labeling testing: 24 hours after spray-paint is applied, wash the applied part with 60-70? water, and flush 1 minutes with cool water, repeat for 10 times. The color label shall remain the same.

Requirement for spear assembly: Test the spear in water to check if the sealing is ok, then screw down spear with a force of 7 – 8 kpm (70 – 80Nm).
preload preload preload