$32.99

3/4" Sanitary Ball Valve

Sanitary design ball valve with tri-clamp fittings disassembles quickly and easily for cleaning.  Internal diameter is approx. 5/8".

We strongly recommend disassembling and cleaning your valves after every use to prevent unnecessary contamination of your beer or wine.   Internal seals prevent liquid from being exposed to threads.

   $2.49

Replacement Valve Seal Kit For 3/4" Sanitary Valves

Valve seals can wear over time, begin to leak, and if nicked or gouged, can be come a source of contamination.  Rather than buy a whole new valve, we offer replacement seals.  Each kit contains a complete set of seals for your valve.

   $42.99

1" Sanitary Ball Valve

Sanitary design ball valve with tri-clamp fittings disassembles quickly and easily for cleaning.  Internal diameter is approx. 7/8".

We strongly recommend disassembling and cleaning your valves after every use to prevent unnecessary contamination of your beer or wine.   Internal seals prevent liquid from being exposed to threads.

   $2.49

Replacement Valve Seal Kit For 1" Sanitary Valves

Valve seals can wear over time, begin to leak, and if nicked or gouged, can be come a source of contamination.  Rather than buy a whole new valve, we offer replacement seals.  Each kit contains a complete set of seals for your valve.

   $54.99

Out of stock

1.5" Butterfly Valve

The most sanitary option for your brewing equipment. 

   $7.50

Tri-Clamp

All Stainless Steel.

  $0.99

Tri-Clamp Gasket

Food grade tri-clamp gasket for use with your Stout Tanks and Kettles conical fermenters and brew kettles/whirlpools.

   $9.99

3/8" Hose Barb

Hose barb fits 3/8" ID hose.  Sanitary design uses no threads.  (Only the hose barb is included, not the clamp or gasket).

   $9.99

1/2" Hose Barb

Hose barb fits 1/2" ID hose.  Sanitary design uses no threads.  (Only the hose barb is included, not the clamp or gasket).

$10.99

1/2" x 90 Degree Hose Barb

1.5" Tri Clamp Adapter with 1/2" x 90 Degree Hose Barb Hose barb.  Fits 1/2" ID hose.  Sanitary design uses no threads.

Lid Gasket for 7.3 Gal. Conical Fermenter

Replacement lid gasket for conical fermenters.  The same size gasket is used on the top of the fermenter and the lid.  Includes one (1) gasket.  Approx. 11.5" ID x 12.75" OD.

Lid Gasket for 14.5 Gal. Conical Fermenter

Replacement lid gasket for conical fermenters.  Fits fermenters with lid held down by cross arm over the top of the fermenter (and the tank is removable from the stand).  The same size gasket is used on the top of the fermenter and the lid.  Includes one (1) gasket.

Lid Gasket for 14.5 Gal. Conical Fermenter with Welded-On Legs and Racking Arm

Replacement lid gasket for conical fermenters.  Fits 14.5 gal. fermenters with ring clamp style lid.  Also fits 7.3 gal. short fermenters and 7.3 gal. fermenters with wheels with ring clamp type lid.  Includes one (1) gasket.

$29.99

Spray Ball for 40 Gal. Fermenter

For our 40 gallon fermenter that fits in a freezer (and more).  The 3" TC fitting attaches to the fermenter's 3" TC port.  The spray ball can be installed and removed directly through the 3" TC port.  The 1.5" TC outlet is for connecting your hose or hose barb for cleaning in place.

$39.99

Spray Ball with 90 Deg. Elbow on Inlet Side

The 3" TC fitting attaches to the fermenter's 3" TC port.  The spray ball can be installed and removed directly through the 3" TC port.  The 1.5" TC outlet is for connecting your hose or hose barb for cleaning in place.

$35.00

Dip Tube Kit, Small

For use with mash tuns and/or flat bottom brew kettles to help you get more wort out of your vessel without having to tip it.  Install tube from the inside of the kettle.  Attaches to external adapter.  Then attach your valve to the adapter.  Includes tube, adapter, clamp, and gasket.  Fits 1.5" tri clamp fittings.  For 3/4" and larger pipe size on outlet.

This size will not make a significant difference for dish-bottom brew kettles.

$35.00

Dip Tube Kit, Large

For use with mash tuns and/or flat bottom brew kettles to help you get more wort out of your vessel without having to tip it.  Install tube from the inside of the kettle.  Attaches to external adapter.  Then attach your valve to the adapter.  Includes tube, adapter, clamp, and gasket.  Fits 1.5" tri clamp fittings.  For 1" and larger pipe size on outlet.

This size will not make a significant difference for dish-bottom brew kettles.

$15.00

out of stock

1.5" TC x 1" NSP Adapter

This adapter allows you to connect a standard electric heating element to a 1.5" tri clamp port on your brew kettle.  Port size and ferrule size must both be 1.5".