7 BBL Hot Liquor Tank with HERMS coil and Bottom Heat Shield (Direct Fire)
  • photo of a 7 bbl hot liquor tank (direct fire) with HERMS coil  from Stout Tanks
  • photo of the back of a 7 bbl hot liquor tank (direct fire)
  • Photo of the Interior and herms coil of a 7 barrel Hot Liquor Tank from Stout Tanks
  • photo of the bottom heat shield of a 7 bbl hot liquor tank (direct fire)
  • photo of the bottom back of a 7 bbl hot liquor tank (direct fire)
  • close up of a butterfly valve and inline sight glass on a 7bbl hot liquor tank
  • photo of the top of a 7 bbl hot liquor tank (direct fire)
  • brewery financing options available from Stout Tanks and Kettles

7 BBL Hot Liquor Tank with HERMS coil and Bottom Heat Shield (Direct Fire)

SKU HL290TW-TI-HC-SG-BHS

This direct fire 7 bbl hot liquor tank features a built-in HERMS coil that will provide the ability to control mash temperatures. This is done by recirculating wort from the mash tun, through the HERMS coil, and back into the mash tun. 


Building or Expanding your 7 bbl brewhouse?  Get started with a FREE quote from a brewery consultant.


HL290TW-TI-HC-SG-BHS (3674) 

Price: $4,474.00
Quantity

Estimated Availability: July 05, 2021

  • Details
  • Tips for Use
  • Material: Premium virgin 304 stainless steel
  • Capacity: 290 gallons

This stainless steel 7 bbl hot liquor tank features:

  • HERMS coil and Bottom Heat Shield
    • Bottom Heat Shield - helps protect the burner control components from the heat that can build up under the kettle
  • Circular opening that helps direct the fresh air up into the burner while cooling the igniter and wiring
  • Side Heat Shield - protect the brewer
  • Stainless steel HERMS coil, 76.8' L x 3/4" OD; heat transfer surface area = 15 sq. ft.
  • Tangential inlet
  • Thermowell
  • Sight glass
  • 3/4-in. NPT upper water inlet
  • Supports/brackets under kettle for burner (burner offered separately)
  • Bottom and side heat shields
  • Clamps, gaskets

  • Dimensions:  40-in.D x 82-in.H

Optional upgrade available to Advanced Heat Chamber design. Ask us for details.


Exhaust ductwork requirements are a function of your installation and building design. We recommend your burner exhaust vent system be designed or verified by a licensed professional engineer to ensure that the system will function as intended. An improperly designed venting system may cause the burners to perform poorly or unsafely.


You may wish to install an inline thermometer on the HERMS output side to monitor the wort temperature as it exits the coil. 


With our control packages (sold separately), this can be automated where the recirculation pump is automatically switched on and off to maintain your desired mash temperature. 


Need to add cellar tanks to your brewery, winery or commercial facility?  Here are some options to consider:

Product Reviews

 

We welcome your feedback.  Please sign in to rate this product and leave a tip for other craft brewers. Cheers!

Tips for Use

Brewmunity strong.  Please sign-in to share your tips and tricks about this product with the craft brewing community.